Search results

Please check equipment salvage yards, as they're usually the best place to find older loader parts or a complete rear end.

My excavator swings left normally, but it won't swing to the right. I only hear a slight click when trying to swing right, and there are no visible hydraulic leaks.

Yes, the height varies by the type and model. Most standard on-road dump trucks are around 10-12 feet (3-3.7 m) tall, while larger articulated or off-highway mining dump trucks can exceed 20 feet (6 m).

I replaced the front hydraulic pump on my machine because it was leaking into the engine crankcase. The new John Deere replacement pump is larger than the original, but now all hydraulic functions are slow. Has anyone experienced this after installing the updated pump?

Hi @Felipe Rances, start by checking for anything mechanically blocking the swing before digging into the hydraulics. After that, inspect the swing cylinder linkage and hoses for damage or binding.. it might save you a lot of unnecessary teardown.

The ride control on my JD 244L loader has stopped cushioning the machine, so I'm planning to check the accumulator charge. Service information shows it should be charged to around 350 PSI, but my current adapter doesn't fit the accumulator.

I have a 2001 model with 6,505 hours, and it randomly wants to go into park mode. Other than that, it's been a great machine. Has anyone dealt with this issue before or know what could be causing it?

It depends on the make and model, but most older machines are checked with the engine idling, transmission in neutral, and the oil at operating temperature. If you post the model and serial number, someone here should have the correct procedure.

I agree. Some of the best machines I've owned weren't the newest ones & they were the ones that showed up every day, got the job done, and never seemed to quit.

Iave a question about injector pump lubrication. I recently repaired the transfer pump and lost a small amount of oil during the process.

That's an interesting one. If it only starts shifting properly after hitting 6th gear, I'd be curious whether the issue is in the transmission control valve, a sticking solenoid, or maybe a calibration problem from the reman unit. Have you checked if all the clutch pressures are within spec...

Very true. We've gotten better at tracking idle time, but on a lot of jobsites it's still one of those hidden costs that quietly adds up. The biggest improvement I've seen is setting idle-time targets for operators so the data actually turns into action.

I'm looking for some advice on a transmission issue with my Case IH 485 Quadtrac. The tractor mainly pulls a direct-mount scraper for drainage ditch and earthmoving work. Lately, I've noticed that the transmission doesn't seem to shift properly when the scraper is loaded. It has been calibrated...

Yeah, not every 870G was equipped the exact same way. From what I've seen, the hydraulic counterweight removal system could depend on the machine configuration, customer specs, or intended application.

I'm looking at an older Layton drag box paver for recycled asphalt work and trying to figure out the safest way to move it without a loader. Can these be safely chained and pulled behind a truck, or is there a better way to transport them?

From what I've seen, coal mine operator jobs in the U.S. usually pay more upfront because of the overtime, shift work, and hazard pay. Some mine operators can make really strong money during busy periods, especially in states with active mining operations.

I'm trying to track down an electrical issue on my Komatsu D85P-21. The dash console suddenly stopped lighting up, including the fuel and oil temp gauges, and now the machine won't start. What's strange is the fans and wipers still work with the key on, so it seems like only part of the...

A lot of people don’t realize how much planning goes into transporting heavy equipment 😅 Between permits, route checks, and securing the load properly, even a short move can take serious coordination.

$30K CAD is definitely a tough pill to swallow 😅 If it really matches a Hendrickson 100K setup, you might save a lot going aftermarket or rebuilt. I’d just double-check the pivot measurements and torque specs before ordering anything, since even small differences can turn into alignment...

I normally check fluid level, filters, hoses, and leaks first before moving to pressure tests.