Search results

I’m a small contractor and thinking about picking up a machine from there, but not sure how it really works out in practice. The listings and inspection reports look solid, but I know it’s still a bit of a gamble buying sight unseen.

I've been checking out listings on IronPlanet and trying to figure out the best machines to start with for a small construction business. From what I see, a lot of people suggest starting with: Mini excavator Skid steer Backhoe loader But I'm not sure what actually makes the most sense in...

I've got a Caterpillar 315L excavator that sat for years before I got it. I went through it pretty hard, rebuilt cylinders, got it running decently, then had tracking issues. Ended up rebuilding the swivel joint, and that actually fixed the tracking problem. The machine now tracks strongly and...

Hey everyone, I'm looking into using SmartEquip to help manage our parts ordering, and I'm curious about how it's working for others. For those of you running a mixed fleet (Cat, Deere, Kobelco, etc.), how frequently is your team actually using it? Does it really save time on the shop floor, or...

Hey everyone, I just replaced the CPU controller on my 2006 Kobelco SK135SRLC-1E. I've finished the minor adjustments, but I'm stuck on the "A-adjustment" for the stepping motor and fuel pump. Does anyone have the step-by-step instructions or the button sequence on the monitor to get this...

Hey everyone, I’m working on a Volvo EC460 excavator that seems to have a hydraulic leak coming from between sections of the main control valve block. From what I can see, it looks like the fix might involve removing a lot of hydraulic lines, pulling the valve body out of the machine, and...

Hey guys, I’ve been looking into different heavy equipment transport options lately and keep coming across Veritread. I’m planning to move either an excavator or a mid-size dozer for an upcoming job, and I’m trying to understand how reliable these heavy haul services really are. For those...

Having a steering issue on a CAT D5C where it won’t steer left and only steers right with heavy brake application could point to low pressure from the steering valve circuit, internal leakage, or worn clutch components. Before pulling the steering valves apart, it’s worth checking charge...

Hey everyone, I'm about to work on a steering issue and I may need to remove the priority valve from the steering system, but I want to make sure I'm doing it the right way before I start pulling things apart. From what I understand, the priority valve is there to make sure the steering always...

I'm getting my Bobcat S150 ready for winter and was wondering what you all think is the best snow tire setup. I'll mostly be doing snow removal on driveways, small lots, and some icy areas, so traction is a big deal for me. I've seen a few options like snow tread tires, chains, and...

I'm currently dealing with an error warning showing on the monitor of my Liebherr HS 853 HD duty cycle crawler crane, and I'm trying to figure out the best way to fix it before calling for service. From what I understand, error messages on the Liebherr HS 853 HD display panel can be caused by...

Hey guys, has anyone here had trouble with a Cat 953Z not starting? Mine suddenly won’t fire up, and I’m trying to figure out where to start before calling the dealer. I’m already checking the basics like battery, starter, fuel flow, safety switches, and wiring, but I’m wondering if there are...

Has anyone here used Veritread recently? How was your experience?

On most machines, the preheat system is controlled by a temperature switch or sensor. When the engine is already warm, the switch stops power from reaching the relay or heater, so the preheat will not turn on. This helps protect the heater and reduce electrical load. If the preheat is not...

On most 1966 Ford payloaders with an Allison transmission, the easiest way to remove it is from the top, especially if the engine is already out. This gives better access and lifting space. Basic steps: Disconnect the batteries and drain the transmission oil. Remove floor plates, access...

On a Gehl RS8-44 with a tri-function joystick and PWP, feathering the brake while moving can make the joystick lose pressure. It only returns when the brake is fully released or the machine stops. The declutch switch doesn't help, even with the wireless remote. Likely causes: priority valve...

I'm asking because I'm considering participating in an auction, but I'm not sure if being outside Alabama would be an issue.

i know pricing probably varies depending on location, training provider, and whether it's classroom-based or hands-on, but i'd love to hear what people here have actually paid or seen in the industry.

Has anyone here actually bought equipment internationally through them? How smooth is the process, and is it really worth looking outside your own country for deals?

Just trying to get a clearer picture of how their marketplace works in real-world situations. appreciate any insights!