How should you really park a forklift?

USVeteran

Member
Messages
122
I'm trying to make sure our team is doing this safely. What's the right way to park forklifts? Are there industry best practices or tips people actually follow to avoid accidents and damage? would love to hear from anyone with hands-on experience!
 
Hey @USVeteran, from experience, we keep it simple:
-forks flat on the ground
-neutral gear,
-parking brake on,
-engine off, and key out, plus always park on level ground and never block walkways or exits.
It sounds basic, but sticking to that routine really helps avoid accidents
 
Best practice is to always park forklifts in designated areas with the forks fully lowered, parking brake engaged, controls in neutral, and the key removed if unattended. Avoid blocking walkways, exits, or fire equipment.\
 
Those are all solid practices. I'd just add that it's also worth turning the wheels straight before walking away, especially if the forklift was being used outdoors or on slightly uneven ground..it only takes a few seconds and adds another layer of safety.
 
Lowering the forks flat and setting the parking brake is absolute rule number one for us. We also make it a habit to tilt the mast slightly forward so the tips are touching the ground completely to prevent any tripping hazards. Simple routine, but keeps everyone safe.
 
It is also a very good practice to park the truck on a flat surface, drop the forks completely on the floor, engage the parking brake, place the control levers into neutral position, and turn off the ignition before leaving the truck. In case an operator needs to park on a ramp, he should do that only in case of an absolute necessity and chock the wheels in such a situation. We always tell the operators to park in appropriate places only, avoiding fire equipment, exits and walkways.
 
A safe rule is, park on level ground, fully lower the forks, put the controls in neutral, apply the parking brake, switch off the engine, and remove the key. Also avoid blocking exits or walkways, and follow your site's operating procedures and manufacturer guidance.
 
Back
Top