Search results

I'm having a hydraulic issue with my Kobelco SK85. The machine bogs down on all hydraulic functions, and when I raise the boom, the dipper slowly creeps out at the same time. If I fully extend the arm, the engine will almost stall. The pumps aren't making any unusual noise, and I've already...

I haven't worked on a Pipeliner myself, but I'd start by comparing part numbers if you can find manuals for both years. Sometimes later machines share major components, but there can be differences in gear ratios, shafts, or mounting points that affect interchangeability.

My 2001 Volvo EC240LC started up fine this morning, but the final drive quit working and the bucket curl became extremely slow in both directions. The track will move normally only when I press the auxiliary pedal while tracking. Any ideas on what could cause both issues at once?

That's pretty much how I look at it too. Once repair bills and downtime start becoming less predictable, I usually start thinking about selling while the machine still has decent resale value instead of waiting for a major failure.

I'd also check the hour meter against the machine's overall condition.. excessive wear on controls, drums, or joints can sometimes tell a different story than the numbers.

You may be able to replace the seal without removing the full timing cover, depending on the exact pump setup. A lot of times the pump can be pulled far enough to change the O-ring or gasket, but timing marks and cleanliness are really important. Definitely worth checking the service manual...

I'm working on a Volvo A25C and currently have no headlights, tail lights, brake lights, interior lights, or tachometer working. The machine runs, but it seems like everything related to the electrical side stopped at once. I'm trying to figure out the best place to start checking before...

More people looking into financing programs tied directly to auction purchases since the process can be smoother and faster for used equipment.

For long-distance moves, costs can easily reach hundreds of thousands of dollars.

Mine changes tone when put in gear and also when using the trans disengage switch. I also found some metal and brass shavings in the filter. Could air in the system cause this, or is it pointing to something more serious?

Hey folks, I occasionally haul oversized equipment on a flatbed, and dealing with wide load permits can sometimes be more challenging than the haul itself. How do you handle permits, route planning, and escort requirements in your area, and do you have any tips for making the process smoother?

From my experience, the biggest thing is making sure all your equipment management, ERP, and vendor systems are using the latest SmartEquip integrations. Once everything is connected properly, parts lookup, ordering, and service information flow a lot more smoothly across multiple sites and...