Search results

Yeah, not every 870G was equipped the exact same way. From what I've seen, the hydraulic counterweight removal system could depend on the machine configuration, customer specs, or intended application.

I'm looking at an older Layton drag box paver for recycled asphalt work and trying to figure out the safest way to move it without a loader. Can these be safely chained and pulled behind a truck, or is there a better way to transport them?

From what I've seen, coal mine operator jobs in the U.S. usually pay more upfront because of the overtime, shift work, and hazard pay. Some mine operators can make really strong money during busy periods, especially in states with active mining operations.

I'm trying to track down an electrical issue on my Komatsu D85P-21. The dash console suddenly stopped lighting up, including the fuel and oil temp gauges, and now the machine won't start. What's strange is the fans and wipers still work with the key on, so it seems like only part of the...

A lot of people don’t realize how much planning goes into transporting heavy equipment 😅 Between permits, route checks, and securing the load properly, even a short move can take serious coordination.

$30K CAD is definitely a tough pill to swallow 😅 If it really matches a Hendrickson 100K setup, you might save a lot going aftermarket or rebuilt. I’d just double-check the pivot measurements and torque specs before ordering anything, since even small differences can turn into alignment...

I normally check fluid level, filters, hoses, and leaks first before moving to pressure tests.

A lot of fleets are saying the telematics alone helps reduce downtime because they catch problems earlier instead of waiting for a breakdown. Electric and hybrid lifts are also becoming way more common, especially for indoor or city jobs where emissions matte

I'm having a problem with my Caterpillar 140H. The machine shifts into all gears normally, but 1st, 2nd, and 3rd gears are very slow and weak. Gears 4th to 8th work fine and have normal speed. Could this be a low transmission pressure? Trying to figure out where to check first before replacing...

Tech upgrades are driving values.

Good tips here! one quick trick that’s saved me is checking sprocket teeth if they start looking hooked instead of rounded, that’s usually your early warning sign something’s off

Sounds like you’re on the right track. . could be a sticky counterbalance valve, but I’d also check the leveling cylinder and sensors first since those usually cause that “tilts up when raised” behavior

Gives you service info, parts diagrams, and fault code support tied to your machine

I've had a pretty smooth experience with Boom & Bucket transport after winning a machine. Pickup was on schedule Delivery was pretty close to the timeline given Communication was solid, got updates along the way Only thing I'd say is it still depends on the carrier, so I always confirm timing...

Hey guys, looking for some advice on a Caterpillar 330C (2002, ~14k hours) I recently picked up. The previous owner mentioned a whining pump noise when warm, especially under multiple functions, and I'm seeing the same. Once it gets up to operating temp, it starts jerking/hesitating and makes a...

Been seeing more salvage heavy equipment listings lately, and it's got me thinking-are these actually worth it? Some of these machines look like solid deals if you're willing to put in the work, especially for: Parts machines Rebuild projects Budget-friendly equipment for smaller jobs But I'm...

Yeah daily pressure checks help a ton, learned the hard way that ignoring it turns your tires into expensive “decorations” real quick 😅

If a piece of debris is stuck in one or if a spring has broken, the hydraulic fluid will bypass the motor and dump back to the tank instead of moving the machine.

Forklift is safest; skid steer works if you're careful. Keep the load low, forks fully under, and unload on solid ground.

I've got a Caterpillar 627B scraper, and the bail has never worked since I got it. I checked the manual, but it's not very clear. Bail doesn't move at all Other hydraulics are working fine No visible leaks or damage How is the bail system supposed to work on this machine? And what are the...